Joined: Dec 04, 2006 Posts: 834 Location: Port Melb
Posted: Tue Jan 20, 2015 6:25 pm Post subject: Do I need a Re-amp box/solution?
in the middle of recording a demo/EP - all tracks have been completed through digital interface and I want to process 4 bars of a bass track - no VST plugin yet has come close to re-creating the sound of a Sovtek Green Russian Big Muff that bass player uses live. I have a Presonus Firepod 10 that has line outs - my idea was to play the pre-recorded bass track, route it through one of the TRS outputs in to the Muff and back in again to capture clean signal through effect. But... my hunch is that the outputs are designed for line level effects (I take this to mean rack gear not stomp boxes looking for a high impedance input) - here's the blurb from website manual;
Line Inputs/Preamp Outputs. The FIREPOD features ¼” TRS balanced Send and Return jacks on
Channels 1 and 2. These jacks are labeled as Preamp Output (SEND) and Line Input (Return). These
connectors will accept either balanced (TRS – Tip Ring Sleeve) ¼” cables or unbalanced TS (Tip Sleeve)
¼” cables. These connectors allow the use of external processors such as reverbs, de-essers, limiters,
EQ’s, etc. Simply connect the Preamp Output jack, balanced or unbalanced to the input of the external
processor. Then connect the FIREPOD’s Line Input jack to the output of the external processor. The signal
is now routed out of the FIREPOD, into the external processor, then back into the FIREPOD. The final,
processed signal will be available to record now. The Line Input can also be used as a standard line level
input for devices that do not require pre-amplification (such as a CD player, drum machine, sampler and
am I wasting my time driving over to get stompbox (an hour there and back) - do i need a re-amp box to make this work? Oh Melband gurus I look to thee in my hour of need... _________________ I like the way Americans say Orifice
Joined: Oct 13, 2009 Posts: 57 Location: Outer East, Melbourne
Posted: Mon Aug 15, 2016 6:51 pm Post subject: By degrees..
Hi there. Did you try this out or is the question still in the ether?
My suggestion is to try it with the Muff, as your quote from the manual clearly states it will work with unbalanced cables. There is a fair chance that it would sound better with a re-mp device but I suspect it would be a question of quality of sound, amount of gain needing to be applied etc, rather than it simply not working.
Joined: Nov 12, 2007 Posts: 378 Location: Melbourne
Posted: Mon Oct 10, 2016 1:32 pm Post subject:
Yes, you need a reamp box or a passive DI in reverse in order to impedance match properly. Then you will need another DI or HI-Z input on the interface for the return signal (if you're not micing a cab).
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum